Addressable 110V /220V AC High Voltage Strip With 5050 60leds RGB Color-Changing Tape
Product parameters,
| Product name | Addressable 110V/220V AC led strip |
| LED type | SMD 5050 |
| LED quantity | 60 leds/ meter |
| LED frame material | pure copper |
| Light color | RGB dream color |
| Pixels | 10 pixel per meter |
| Max Power | 7W/ meter |
| Input Voltage(V): | 110V/220V AC |
| Lamp Body Material: | Copper |
| Cut Length: | 1M |
| Dimension | 7x17mm |
| Warranty(Year): | 2-years |
| Lamp Body Material: | Copper |
| Length | 50 meters/100 meters per roll |
| IP Rating: | IP65 |
| Controller | no need controller any more |
The high voltage 110V/220V addressable strip features ,
1. The product has passed CE/ROHS certification
2, Easy to install and use, no need for debugging
3, Cost saving, without switching power supply, controller, network cable, signal amplifier and other material costs; Labor costs can be saved a lot;
4, The longest 200 meters single end power supply without pressure drop (suitable for long distance buildings, rivers, Bridges, etc.)
5, Can achieve multiple loop synchronization program effect
6, Flexible cutting, with cutting with use, two-line design, simple operation.
Product structure drawing
Cautions about usage
1. Do not make continuous distortion of the lamp belt, many times of distortion will easily cause fatigue damage of the internal power supply line, the distortion Angle is not more than 45 degrees, do not bend in the diameter of the arc below 60mm;
2. The input end of the lamp belt needs to be connected in parallel on a main line to realize multi-loop synchronization;
3. In order for the product to work stably, please use the product in some places with good ventilation conditions. It is forbidden to roll the whole lamp belt together to light up. The lamp belt must be spread out before lighting the test.
4. In order to ensure the life of the lamp belt, do not pull the product forcibly during installation. Do not bump or squeeze the surface of the lamp bead forcibly. Lamp strip installation, fixed must be firm, can not have flapping, swing phenomenon. Otherwise, it will cause fatigue breakage of the lamp wire and damage to the lamp belt;
5. Part of the lamp belt of the product is waterproof IP65, and part of the connector is only used for fixation and protection against electric shock when the factory ships; When used outdoors, the joint should be placed in an environment without water or the joint position should be sealed by professional electricians to ensure that the joint position will not be flooded.
Application,
■ Indoor and outdoor lighting for hotels and gymnasiums
■ Home lighting
■ Lighting in parks, gardens and other places
Product Tags:
|
|
Addressable 110V / 220V AC High Voltage Strip With 5050 60leds RGB Color Changing Tape Images
|
